Orbital

Orbital manual

Getting started

Orbital puts you in the middle of a sound field and lets you move sounds around you.

Stereo or binaural

Orbital works and sounds good in both. A new Uno starts in stereo, so it plays on any speakers or interface. It was designed around binaural on headphones, though, and that is where the full 3D placement comes alive: right-click Uno and tick Output: Binaural.

Quick start

  1. Add Orbital Uno to your patch.
  2. Patch a sound (a VCO, a sample player, a drum loop) into Uno’s IN jack.
  3. Patch Uno’s L and R outputs to your audio interface (VCV Audio).
  4. Turn the centre knob in the visualizer to move the cursor around the circle, then press it. A satellite appears there, and you hear the sound come from that direction.
  5. Turn Speed to the right. The satellite starts orbiting clockwise around you. Turn it left for anticlockwise; in the middle it stands still.
  6. Put on headphones, right-click Uno and tick Output: Binaural. Sounds now come from all around: in front, behind and to the sides. This is the sound Orbital is built for.

Ideas and words

WordMeaning
ListenerYou, in the middle of the visualizer.
SourceOne sound patched into Orbital. Uno has one; each MAS adds one more. Four at most.
SatelliteOne copy of a source placed somewhere around the listener. Each satellite plays the same sound from its own direction.
ConstellationA source and its satellites, up to 5 per source, in the source’s own colour.
SectorThe circle is split into 8 sectors. SNAP steps satellites between them.
SelectionUno’s knobs, buttons and centre knob act on every selected source, like a fader group.

How mixing works

  • Everything you want placed and moving goes into Uno or a MAS (four sources at most). It all comes out of one stereo pair.
  • Everything that should stay still (drums, bass, effect returns) goes into a Bypass channel.
  • Use either Uno’s L/R or Bypass as your output. With Bypass in the chain, Uno’s jacks switch off by themselves.
  • Effects go before Uno, on the source. A reverb or delay patched into Uno’s (or a MAS’s) input is placed and moves with the sound.
Keep the output clean

Uno’s output is a finished binaural mix. The direction you hear lives in tiny timing and tone differences between the left and right ear, and anything that changes left and right differently will blur or break them.

So don’t put effects after Uno or Bypass: no reverb or delay on the master, no stereo wideners, mid/side tools, panners, stereo chorus or EQ that treats each side differently, and don’t sum it to mono. Turning the overall volume up or down is fine.

  • Levels: feed sources at about ±5 V. Auto level keeps stacked sources near the loudness of one. If Uno’s level light turns red, lower a Level trim or the source.

Good to know

  • Binaural is made for headphones; stereo is for speakers. Both sound good, and binaural is what Orbital was designed around.
  • Binaural works at any sample rate.
  • Muted and empty sources stop computing, to save CPU.
  • Limits: 4 sources × 5 satellites.

Credits

Binaural rendering uses the 3D Tune-In Toolkit (LGPL-3.0) with head responses from the LISTEN HRTF database (IRCAM). The full list is in CREDITS.md in the plugin folder.

Questions or bugs: support@aplabaudio.com